bfd:Sess
BFD Session
Telemetry Sensor Path(s)
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| asyncPort | l4:Port (scalar:Uint16) |
Asynchronous mode Source Port | RANGE: [0 , 0xffff] DEFAULT: unspecified |
| authSeqno | bfd:AuthSeqno (scalar:Uint32) |
Authentication Sequence Number | RANGE: [0, 4294967295] |
| authType | bfd:AuthT (scalar:Enum8) |
Active value of Authentication Type | SELECTION: 0 - none 4 - sha1 5 - met-sha1 DEFAULT: none |
| destAddr | address:Ip |
Destination IP Address | Value must match ipv4 or ipv6 known format |
| detectMult | bfd:DetectMult (scalar:UByte) |
Active value of Detection Multiplier | RANGE: [1 , 50] DEFAULT: 3 |
| diag | bfd:DiagCode (scalar:Enum16) |
Protocol Diagnostic code | SELECTION: 0 - none 1 - detect-timeout 2 - echo-fail 3 - nbr-signal-down 4 - fwd-plane-reset 5 - path-down 6 - concat-path-down 7 - admin-down 8 - rev-concat-path-down |
| echoPort | l4:Port (scalar:Uint16) |
Echo mode Source Port | RANGE: [0 , 0xffff] DEFAULT: unspecified |
| echoTxIntvl | bfd:MinTxIntvl (scalar:Uint16) |
Active Value of Echo Tx Interval | RANGE: [50 , 999] DEFAULT: 50 |
| flags | bfd:PktFlags (scalar:Bitmask16) |
Packet Flags | SELECTION: 1 - demand 2 - poll 4 - final 8 - authentication 16 - echo |
| ifId | nw:IfId (base:IfIndex) |
Interface ID associated with the BFD session | Must match first field in the output of show intf brief. Example: Eth1/1 or Vlan100 |
| iod | nw:Iod (scalar:Uint32) |
Interface ordinal associated with the BFD session | RANGE: [1 , 0xffffffff] DEFAULT: 1 |
| lastDiag | bfd:DiagCode (scalar:Enum16) |
Last Diagnostic code | SELECTION: 0 - none 1 - detect-timeout 2 - echo-fail 3 - nbr-signal-down 4 - fwd-plane-reset 5 - path-down 6 - concat-path-down 7 - admin-down 8 - rev-concat-path-down |
| lastDownTime | scalar:Date |
Last Down Time | DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z |
| lastTransTime | scalar:Date |
Transition Time. Last time when protocol state changed | DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z |
| localDetectMult | bfd:DetectMult (scalar:UByte) |
Local value of Detection Multiplier | RANGE: [1 , 50] DEFAULT: 3 |
| localMac | address:MAC |
Local MAC Address | Value must match MM:MM:MM:SS:SS:SS format |
| localRxIntvl | bfd:MinRxIntvl (scalar:Uint16) |
Local Value of Rx Interval | RANGE: [50 , 999] DEFAULT: 50 |
| localTxIntvl | bfd:MinTxIntvl (scalar:Uint16) |
Local Value of Tx Interval | RANGE: [50 , 999] DEFAULT: 50 |
| operSt | bfd:OperSt (scalar:Enum8) |
Operational State | SELECTION: 0 - admin-down 1 - down 2 - init 3 - up |
| remoteDiscr | bfd:Discr (scalar:Uint32) |
Remote Session Identifier of the BFD session | RANGE: [0, 4294967295] |
| remoteMac | address:MAC |
Remote MAC Address | Value must match MM:MM:MM:SS:SS:SS format |
| remoteOperSt | bfd:OperSt (scalar:Enum8) |
Remote Operational State | SELECTION: 0 - admin-down 1 - down 2 - init 3 - up |
| rxIntvl | bfd:MinRxIntvl (scalar:Uint16) |
Active Value of Rx Interval | RANGE: [50 , 999] DEFAULT: 50 |
| slowIntvl | bfd:SlowIntvl (scalar:Uint16) |
Active value of Slow Interval | RANGE: [1000 , 30000] DEFAULT: 2000 |
| srcAddr | address:Ip |
Source IP Address | Value must match ipv4 or ipv6 known format |
| txIntvl | bfd:MinTxIntvl (scalar:Uint16) |
Active Value of Tx Interval | RANGE: [50 , 999] DEFAULT: 50 |
| vrfName | l3:VrfName (string:Basic) |
L3 Context Name | A sequence of characters |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| discr | bfd:Discr (scalar:Uint32) |
Local Session Identifier of the BFD session | RANGE: [0, 4294967295] |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |